VCT Vision ELITE Series User's Guide download pdf (Page 21)

Recording Setting Mode

The application program supports three resolutions - Low

(352 x 240), High (704 x 240) and Progressive (704 x 480).

Note: Do not select 704 x 480 unless you use a progressive

camera. You will actually record interlaced video at this

resolution. To record video at 704 x 480 without interlaced

video, you must use Progressive CCTV cameras. Otherwise, you should select High (704 x

240) to record videos at 704 x 48). The unit will capture video at 704 x 240 and stretch the

video to 704 x 480 for playback.

The default resolution is Low (352 x 240). Note that the higher the resolution, the larger the

image files sizes. Consequently, the HDD usage is higher.

The quality can be selected between 20 and 80, which is the inverse of the compression ratio.

The higher the quality selected, the larger the file size will be. The default setting is 50.

Audio Setting Mode

If audio is to be used, the

“Enable Audio” box should be

checked. The default bit rate is

8000 Hz. This can also be

increased, and there are four

options. The “Audio Sensitivity” and “Recording Time” can also be selected – both can be

from 1 to 255.

Event Frame Setting Mode

In this mode you can configure

the settings for recording in the

Sensor, Motion, Motion &

Sensor modes. You can record up

to 8 frames before and after the event triggering. The number of frames should be entered in

the “Pre Frame” and “Post Frame” boxes.

By using “Hold Event”, you can select the additional hold period, in seconds, when events

from Sensor, Motion, and Sensor & Motion modes are triggered.

Elite Series – Secure Access Video Surveillance

User Guide and Installation Manual

Page 21 of 48 Pages

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 47 48

No comments

VCT Vision ELITE Series User's Guide Page 21